The FSB 42 4254 0001 Flush Pull door handle sets the standard for elegant simplicity.
Two modes of assembly are possible:
But the fittings really come into their own if completely flush recessed. Hardware and door are suffused into a single entity - the door's design credentials are significantly enhanced. No visible fastenings are needed.
Flush pulls are generally fitted on timber doors. The leaf or frame is machined to accept the hardware, which is then clipped or glued in place as required.
Round flush pull 42 4254 requires a cut-out just 17 mm in depth. It is just the job for small, lightweight sliding doors as well as for fitted furnishings or furniture in general.
Material: Stainless Steel or Aluminum, *Black Plastic
Dimensions: 50 mm (1.97") x 50 mm (1.97") x 18.5 mm (.73")
Internal Grip: 30 mm (1.18") x 30 mm (1.18")
0105: Anodized Aluminum Natural
6204: Satin Stainless Steel
*The housing between the front and back plates is a high impact black resin which allows the flush pull to be pressure-mounted into the door - with or without gluing - for a clean installation with no visible screws.
*1 3/4" or greater door thickness required.
Be sure to also check out the Open Flush Pull.
Call us for more info and to confirm leadtimes: +1-888-636-1627