CONCEALED FRAME FOR OUTWARD OPENING DOORS

TUT type for 1-3/4" to 2-1/4" (44 to 65 mm) door leaves

AGS has overcome the problem with vibration cracks by using an integral plastering reinforcement mesh, that bonds the frame to the wall in a permanent way. No cracks, no frame sealants!

For maximum flexibility, 30 min tested by Chiltern Fire. The frame profiles are supplied either mitre-cut to size, or loose for cutting and assembly on-site. They are assembled using locking mitre corner inserts, temporary corner braces and bottom spreader bar. Then the frame is inserted to one side of the opening, attached using moveable brackets. The snap-in mesh ensures no plaster cracks between wall and frame. The door is hung from concealed adjustable hinges set into full-length hardwood sections inserted on all 3 sides of the frame. Suits standard or floor-to-ceiling doors.

Too much to go into it here but download this quick overview if you’re ready to get shamelessly Frameless:

AGS - TUT+TUS General Overview

After reviewing many of the available systems out there, the answer to this often challenging detail was the AGS system of aluminum extruded frames, integrated mesh and connectors. Specifically, for we think their TUS and TUT profiles are worth your consideration.

For the moment, we are only offering AGS to architects and builders that engage index-d/BetterBuildingHardware on a Complete Project Fulfillment basis. Call us to discuss your project or email : PROJECTS@index-d.com

Check out these beautiful frameless door installations. Simple, easy, straight lines.

Installation Videos

• ASSEMBLING VIDEO GUIDE FOR SOLID CONSTRUCTION
• ASSEMBLING VIDEO GUIDE FOR DRYWALL!